MT6737M Leagoo T1 TWRP download and MT6737M Leagoo T1 root

This guide will help you install TWRP and root MT6737M Leagoo T1, the first step is to install TWRP custom recovery on the MT6737M Leagoo T1. The process contains quite a few steps, but most of them take just a few seconds.

If it looks daunting, don’t worry, take each step one by one and you’ll come through with a rooted MT6737 Leagoo T1 / Leagoo T1 Plus within just a few minutes.

1. Download

(click) What's a scatter file?

A scatter file is what tells SP Flash Tool exactly where to flash various parts of the firmware on your phone’s EMMC.

2. Install MediaTek MT6737 MTK6737A preloader drivers

If you don’t already have MTK Preloader Drivers installed, we’ll go through that step now. NOTE: If you get an unsigned driver error and can’t continue with the driver install, then go to step #3. NOTE: Use #1 pack or #2 pack. Do not need to use both.

If MTK MediaTek preloader vcom driver pack #1, click here
  • Open the MTK adb vcom auto install driver pack #1 in WinRAR / unZip
  • No need to extract, double click DriverInstall.exe or installdrv64.exe for x64 bit Windows
  • Allow any permission requests
  • At the end you should see something like this
If MTK MediaTek preloader vcom driver pack #2, click here
  • Open the MTK MediaTek auto vcom driver install pack #2, and go to Win7_WinXP folder for 7 / XP, or Win8 folder for Windows 8 / Windows 10.
  • No need to extract, double click DriverInstall.exe
  • Allow any permission requests
  • When you see “Windows can’t verify the publisher of this driver software”, click “Install this driver software anyway”
  • At the end you should see something like this

3. Turn off driver signature enforcement

Do this step if:

  • You don’t already have MediaTek preloader drivers installed

and

  • Getting error from Windows telling you drivers are unsigned and can’t be installed with pack #1 or pack #2
Click for disable driver signature enforcement guide

To install preloader drivers, some users of 64-Bit Windows may need to disable Driver Signature Verification / Enforcement. This quick procedure will have you up and modding your phone in no time.

  1. Hold SHIFT while left-clicking restart. It’s the same for Windows 8.1 and Windows 10.
    disable-driver-enforcement-1
  2. Your computer will reboot and give you various options. Select “Troubleshoot”.
    disable-driver-enforcement-2
  3. Choose “Advanced options”.
    disable-driver-enforcement-7
  4. Choose “Startup settings”.
    disable-driver-enforcement-3
  5. Select “Restart”.
  6. Select “Disable driver signature enforcement”.
    disable-driver-enforcement-6

Your computer will now reboot into a mode which will allow you to install unsigned drivers, which is covered in the next steps.

Now go back to step #2 and install the MTK Preloader Drivers (GizBeat source)

4. Install and run SP Flash Tool

  • After downloading the latest SP Flash Tool, extract it to a directory where you’ll know where it’s at.
  • Go to the extracted folder.
  • Right-click ‘flash_tool.exe’ and ‘Run as administrator’

5. Load the MT6737M Leagoo T1 scatter

umi-super-root-umi-super-twrp-5

  • If you haven’t already done so, extract the MT6737M Leagoo T1 TWRP and root pack to a folder where you’ll know where it’s at.
  • Select ‘scatter-loading’ from upper-right of SP Flash Tools.
  • Navigate to the folder that you extracted the MT6737M Leagoo T1 TWRP pack to
  • Select ‘MT6737_Android_scatter.txt’ for MTK6737 MTK6737M
  • A checklist of different parts of the ROM should then show in the bottom portion of SP Flash Tools.

6. Select the MT6737M Leagoo T1 TWRP custom recovery

umi-super-root-umi-super-twrp-6

  • If anything is selected besides ‘recovery.img’, deselect them all except ‘recovery.img’
  • Double click the right side of the ‘recovery.img’ line in MTK SP Flash Tool
  • direct SP Flash Tool to the previously extracted MT6737M Leagoo T1 TWRP (‘recovery.img’ in the MT6737M Leagoo T1 TWRP pack)

7. Flash MT6737M Leagoo T1 TWRP

umi-super-root-umi-super-twrp-13

  • Make sure the phone is disconnected from PC and that your phone is powered off.
  • Make sure the box noted in the image above says ‘Download Only’
  • Select ‘download’ from the top of SP Flash Tools.
  • Connect USB cable to phone. Within a few seconds you should see a red bar come up. Wait a few more seconds and the flash should begin.
  • It will all be over in just a few seconds, at which point you should see a dialog from SP Flash Tools telling you the flash is complete.flash-okay-sp-flash-tool

8. Boot into MT6737M Leagoo T1 TWRP recovery and root

  • Disconnect your MT6737M Leagoo T1 from the PC.
  • Hold VolumeUp+Power until you see the MT6737M Leagoo T1 logo show, then release Power, but continue holding VolumeUp until you see the MT6737M Leagoo T1 booted into TWRP.
  • Flash / Install SuperSU.zip from the MT6737M Leagoo T1 Root pack.

Done! Good job. You now have TWRP and a rooted MT6737M Leagoo T1 MT6737 MTK6737M.

If you have any issues, comments, successes or failures, or just want to say thanks, please comment in the comment section and let us know.

https://gizbeat.com/wp-content/uploads/T1-RealPhoto1000x600px_02-450x270.jpghttps://gizbeat.com/wp-content/uploads/T1-RealPhoto1000x600px_02-150x150.jpgDamian ParsonsGuidesLeagooMT6737 MTK6737RecentRootMT6737M Leagoo T1 TWRP download and MT6737M Leagoo T1 root This guide will help you install TWRP and root MT6737M Leagoo T1, the first step is to install TWRP custom recovery on the MT6737M Leagoo T1. The process contains quite a few steps, but most of them take just a...



Related Posts

New Era in mobile gaming – Andreno 750 latest Snapdragon Gen 3 benchmarks offer 80% improvement in Vulkan GPU performance

New Era in mobile gaming – Andreno 750 latest Snapdragon Gen 3 benchmarks offer 80% improvement in Vulkan GPU performance

Rii mini i24 review

Rii mini i24 review

Missing processor power management settings option in advanced power options settings

Missing processor power management settings option in advanced power options settings

G5X Mark 2 review unboxing (in Japanese) and new specs

G5X Mark 2 review unboxing (in Japanese) and new specs

5150mAh UmiDigi F1 coming with Global LTE and powerful Helio P60

5150mAh UmiDigi F1 coming with Global LTE and powerful Helio P60

Meizu M6S and 19:9 Huawei Honor 10 coming soon

Meizu M6S and 19:9 Huawei Honor 10 coming soon