root-mtk6589-hero-h7500+Beginners, please read this full tutorial as well – It explains some of these steps in more detail.

NOTE: This assumes you are starting fresh, or willing to start fresh with a new Flashable ROM and that you’ve already got it downloaded and extracted.

If you’ve already got a ROM installed and don’t want to reflash the entire ROM, you can attempt to just flash over the recovery and UBOOT/LK.BIN from steps 2 and 3 and clicking ‘Download’. This can be done by selecting the scatter file from your extracted ROM and then deselecting everything and pointing the “recovery” and “uboot” to the files from steps 2 and 3.

However, this sometimes will result in an error and in that case, you can try again with the “preloader” file from your ROM selected as well. If you’re still getting an error, just reflash the entire ROM following all steps below.

Click here to go to the required files

How to do it:

1. Install MTK6589 ADB Drivers and verify in device manager your phone is being recognized

2a. For TWRP (This is the touch screen recovery and recommended), download the TWRP recovery and extract it inside the folder of your already extracted SP Flashable ROM. Write over the existing file – OR,

2b. For CWM (clockworkmod recovery), download the CWM recovery and extract it inside the folder of your already extracted SP Flashable ROM. Write over the existing file.

3. Download the LK.BIN UBOOT file and extract it inside the folder of your already extracted SP Flashable ROM. Write over the existing file.
4. Download and copy the superuser zip to the external SD on the phone
5. Download, extract and run MTK6589 SP Flash Tool and load the scatter file from your downloaded ROM
6. Turn Off Phone, pull out the battery for 5 seconds and put it back in
7. Click ‘Upgrade Firmware’ on Flash Tools
8. Plug in Phone – You will see it install the recovery. It should finish with a green circle

9. Unpug your phone from PC.
10. Boot into recovery by holding vol+ and power together
11. Select ‘update from SD’
12. Navigate to the previously copied superuser zip and select it
13. Reboot and verify root

Gizbeat won’t be held responsible if your phone bricks or dies. You attempt at your own risk.

Gizbeat 101 – Root Your 4.2.1 MTK6589 Hero 7500+ / Zopo ZP800H / ZP810 / ZP950H / ZP950+ Damian Parsons How ToRootTutorialsZopo
Beginners, please read this full tutorial as well - It explains some of these steps in more detail. NOTE: This assumes you are starting fresh, or willing to start fresh with a new Flashable ROM and that you've already got it downloaded and extracted. If you've already got a ROM installed and...
<img class="aligncenter size-full wp-image-2005" alt="root-mtk6589-hero-h7500+" src="http://gizbeat.com/wp-content/uploads/2013/03/root-mtk6589-hero-h7500+1.jpg" width="361" height="670" />Beginners, please read <a href="http://gizbeat.com/2002/tutorial-how-to-root-mtk6589/">this full tutorial as well</a> - It explains some of these steps in more detail. <span style="text-decoration: underline;"><strong>NOTE:</strong></span> This assumes you are starting fresh, or willing to start fresh with a new Flashable ROM and that you've already got it downloaded and extracted.<span id="more-2046"></span> If you've already got a ROM installed and don't want to reflash the entire ROM, you can attempt to just flash over the recovery and UBOOT/LK.BIN from steps 2 and 3 and clicking 'Download'. This can be done by selecting the scatter file from your extracted ROM and then deselecting everything and pointing the "recovery" and "uboot" to the files from steps 2 and 3. However, this sometimes will result in an error and in that case, you can try again with the "preloader" file from your ROM selected as well. If you're still getting an error, just reflash the entire ROM following all steps below. <a href="http://chinaphonearena.com/forum/showthread.php?tid=357" target="_blank"><span style="text-decoration: underline;"><em>Click here to go to the required files</em></span></a> <span style="text-decoration: underline;"><strong>How to do it:</strong></span> 1. Install MTK6589 ADB Drivers and verify in device manager your phone is being recognized 2a. For TWRP (This is the touch screen recovery and recommended), download the TWRP recovery and extract it inside the folder of your already extracted SP Flashable ROM. Write over the existing file - OR, 2b. For CWM (clockworkmod recovery), download the CWM recovery and extract it inside the folder of your already extracted SP Flashable ROM. Write over the existing file. 3. Download the LK.BIN UBOOT file and extract it inside the folder of your already extracted SP Flashable ROM. Write over the existing file. 4. Download and copy the superuser zip to the external SD on the phone 5. Download, extract and run MTK6589 SP Flash Tool and load the scatter file from your downloaded ROM 6. Turn Off Phone, pull out the battery for 5 seconds and put it back in 7. Click 'Upgrade Firmware' on Flash Tools 8. Plug in Phone - You will see it install the recovery. It should finish with a green circle 9. Unpug your phone from PC. 10. Boot into recovery by holding vol+ and power together 11. Select 'update from SD' 12. Navigate to the previously copied superuser zip and select it 13. Reboot and verify root Gizbeat won't be held responsible if your phone bricks or dies. You attempt at your own risk.



Related Posts

How to fix or replace unknown IMEI with SN Write Tool

How to fix or replace unknown IMEI with SN Write Tool

How to fix SP Flash Tool image checksum failed

How to fix SP Flash Tool image checksum failed

HS-USB QDloader 9008 How to unbrick and flash your Zuk Z2 and any Qualcomm phone with MiFlash

HS-USB QDloader 9008 How to unbrick and flash your Zuk Z2 and any Qualcomm phone with MiFlash

Newbie Xiaomi Redmi Pro TWRP download and Xiaomi Redmi Pro root

Newbie Xiaomi Redmi Pro TWRP download and Xiaomi Redmi Pro root

Leagoo T1 TWRP download and root Leagoo T1

Leagoo T1 TWRP download and root Leagoo T1

Download Leagoo M5 TWRP and root Leagoo M5 root guide

Download Leagoo M5 TWRP and root Leagoo M5 root guide