For flashing your MediaTek MTK China phone, this is the newest tool. It’s made to work with all previous generation MTK SoC, MT6582, MT6592, MT6577, MT6572, MT6589, as well as the new generation 64-bit SoCs MT6752 and MT6732, MT6795, MT6595, MT6735, MT6753, MT6755, MT6795, MT6797, Helio X20, Xelio X10, Helio P20, Helio X25
https://www.gizbeat.com/7102/newest-sp-flash-tool-for-mtk6752-mtk6732-sp-flash-tool-v5-1452/https://www.gizbeat.com/wp-content/uploads/2015-03-28-23_17_04-About-Smart-Phone-Flash-Tool-450x220.jpghttps://www.gizbeat.com/wp-content/uploads/2015-03-28-23_17_04-About-Smart-Phone-Flash-Tool-150x150.jpgDamian ParsonsHow ToMTK6732MTK6752NoteworthyTutorialsFor flashing your MediaTek MTK China phone, this is the newest tool. It's made to work with all previous generation MTK SoC, MT6582, MT6592, MT6577, MT6572, MT6589, as well as the new generation 64-bit SoCs MT6752 and MT6732, MT6795, MT6595, MT6735, MT6753, MT6755, MT6795, MT6797, Helio X20, Xelio X10,...Damian Parsonshttps://plus.google.com/107879368390224447304admin@gizbeat.comAdministratorHi, I'm Damian Parsons. I've been working with Android phones since the first Droid came out. I'm fascinated by computers and technology. My first BBS were ran on an old Apple IIc and Commodore 64. I work hard to bring the latest updates to you every day - without all the boring fluff. Please subscribe to keep up on the newest China tech.
See our forum -> www.chinaphonearena.comGizBeat
Libor -September 14th, 2015 at 11:30 pmnone
Comment author #39266 on Newest SP Flash Tool for MTK6752 MTK6732 – SP Flash Tool v5.1516 by GizBeat
Hi Damian,
I’m trying to load new CWM recovery but I’m still getting a error: PMT changed for the ROM; it must be downloaded. I have fresh scatter file. The same problem is when I’m trying to download the backup recovery.img which I’ve just read back. Flash tool v5.1532.00 for linux.
Tobtex -February 1st, 2016 at 8:06 pmnone
Comment author #41550 on Newest SP Flash Tool for MTK6752 MTK6732 – SP Flash Tool v5.1516 by GizBeat
PMT error is usually caused by a change in block partition size as compared to what the scatter file says.
The only fix I have happens to come about is formatting the phone and then reflashing every partition.
But in your case, since you only need to flash the recovery, I would suggest you format the recovery partition ONLY by specifying the format start address and length under “Manual Format” then reflash the recovery.img
If you know how to read back then you should know how to specify the recovery size to be formated using the physical start address and the partition length!
Predrag Petak -July 10th, 2016 at 11:27 amnone
Comment author #44257 on Newest SP Flash Tool for MTK6752 MTK6732 – SP Flash Tool v5.1516 by GizBeat
hi.i have leeco le2 and when i try to instal new 5.8.015s offical rom it crashes twrp an mobile stuck on leeco simbol and it stay on that i can not enter recovery or anything.i need scater file for it.can you help me and explain how to put back in life my leeco
Hi Damian,
I’m trying to load new CWM recovery but I’m still getting a error: PMT changed for the ROM; it must be downloaded. I have fresh scatter file. The same problem is when I’m trying to download the backup recovery.img which I’ve just read back. Flash tool v5.1532.00 for linux.
Any ideas? Thanks.
Hello Libor, please post this at the forum. Can help you there.
PMT error is usually caused by a change in block partition size as compared to what the scatter file says.
The only fix I have happens to come about is formatting the phone and then reflashing every partition.
But in your case, since you only need to flash the recovery, I would suggest you format the recovery partition ONLY by specifying the format start address and length under “Manual Format” then reflash the recovery.img
If you know how to read back then you should know how to specify the recovery size to be formated using the physical start address and the partition length!
Cheers
hi.i have leeco le2 and when i try to instal new 5.8.015s offical rom it crashes twrp an mobile stuck on leeco simbol and it stay on that i can not enter recovery or anything.i need scater file for it.can you help me and explain how to put back in life my leeco
I have the same problem ! You have not found a solution yet?